Microsoft 70-445 Q & A / Study Tools

 

MCTS Training, MCITP Trainnig

Best Microsoft MCTS Certification, Microsoft MCITP Training at certkingdom.com




QUESTION
1
You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package has the following features:
Two Data Flow tasks and two Control Flow tasks
A success constraint between each Data Flow task and the subsequent Control Flow task
The package uses one transaction for all the tasks.
You need to configure the package so that the two Data Flow tasks use their own transactions.
You also need to ensure that each Control Flow task is enlisted in the same transaction as its
preceding Data Flow task.
Which three actions should you perform? (Each correct answer presents part of the solution.
Choose three.)

A. Change the TransactionOption property to Supported for the package.
B. Change the TransactionOption property to Required for the package.
C. Change the TransactionOption property to Supported for each Data Flow task.
D. Change the TransactionOption property to Required for each Data Flow task.
E. Change the TransactionOption property to Supported for each Control Flow task.
F. Change the TransactionOption property to Required for each Control Flow task.

Answer: A, D, E



QUESTION
2
You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The
package contains 30 Data Flow tasks and 30 Control Flow tasks. The package runs slower than
expected. You need to capture the start time the finish time and the elapsed time for the
validation and execution of the package. What should you do?

A. Enable the OnProgress event handler and use the Control Flow tasks to write the information
to a log.
B. Monitor the Progress tab during the execution of the package, and then monitor the
Execution Results tab.
C. Use the Performance Monitor tool to capture the counters from the SQL Server SSIS Service
object. Analyze the output for the required information.
D. Use the Performance Monitor tool to capture the counters from the SQL Server: SSIS
Pipeline object. Analyze the output for the required information.

Answer: B



QUESTION
3
Microsoft SQL Server Management Studio (SSMS) is installed on your workstation. Microsoft
Business Intelligence Development Studio (BIDS) is not installed on your workstation.
You need to create a package that must meet the following requirements:
It must be transactional.
It must be optimized for 20 tables.
It must be stored securely in the msdb database of a remote server.
What should you do?

A. Create the package by using DTS Designer.
B. Create the package by using the Package Migration Wizard.
C. Create the package by using the Microsoft SQL Server Import and Export Wizard.
D. On the Microsoft SQL Server 2005 Integration Services (SSIS) menu, click the Create
Package submenu.

Answer: C



QUESTION
4
You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
While testing, a Transact-SQL user-defined function causes duplicate key values that stop the
transformation.
To permit the transformation to continue, the package must perform the following tasks:
1. Ascertain which rows are affected.
2. Insert the rows that fail into a table.
3. Continue with the process.
You need to change certain properties in the package to meet the requirements.
Which three tasks should you perform? (Each correct answer presents part of the solution.
Choose three.)

A. Choose the Redirect Row option for the Error property on the key column.
B. Choose the Ignore Failure option for the Error property on the key column.
C. Choose the Fail Component option for the Error property on the key column.
D. Add a DataReader source to use a new Data Flow destination when the Failure constraint is fired.
E. Add a DataReader source to use a new Data Flow destination when the Completion
constraint is fired.
F. Edit the Error Output properties for each DataReader source and configure each data source for error handling.

Answer: A, D, F



QUESTION
5
You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The package uses at least one sequence container in one transaction. Each transaction controls
a Data Flow task and a Control Flow task. Each Data Flow task has a Success constraint.
The Control Flow task follows the Success constraint. The package must include the following
requirements:
Each Data Flow task must use its own transaction.
The Control Flow task and the Data Flow task that precedes it must succeed or fail as an atomic unit.
A restart point must restart each Data Flow task and the Control Flow task that follows it as an
atomic unit.
You need to make changes in the control flow designer to meet the outlined requirements.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A. Add all the Data Flow tasks and the Control Flow tasks to one sequence container.
B. Add a sequence container for each Control Flow task and the Data Flow task that precedes it.
C. Change the FailPackageonFailure property to true for each new sequence container that is
added to the package.
D. Change the FailPackageonFailure property to false for each new sequence container that is
added to the package.

Answer: B, C



QUESTION
6
You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. An
Analysis Services Processing task in the package requires data from a file. The file is exported to
a file share.
If the file is not available on the file share, the Analysis Services Processing task must import data
from a remote Microsoft SQL Server 2005.
You need to add steps to the package to import the data.
What should you do?



Answer:



QUESTION
7
You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package.
The OLE DB data source for the package is a database that is updated frequently.
You need to create a package that accomplishes the following tasks:
Implement the IRowsetFastLoad interface.
Support various data flow destinations.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A. Use an OLE DR data flow destination.
B. Use a Recordset data flow destination.
C. Use a DataReader data flow destination.
D. Create separate data flow destinations within the same Data Flow task.

Answer: A, D



QUESTION
8
Your company’s business intelligence (BI) model uses Microsoft SQL Server 2005 Integration
Services (SSIS). There are 20 packages that use the same configuration. The package
configuration is stored in an XML file as a variable.
You need to track the changes that affect a package that uses one variable. You also need to
modify the package to provide automatic notification by e-mail whenever there are changes to the
variable.
What should you do?

Answer:



QUESTION
9
You are designing a Microsoft SQL Server Integration Services (SSIS) package.
The package contains a single OLE DB data source. The package must be deployed on 10
servers. The package uses the XML configuration file to connect to a pre-assigned server.
You need to ensure that the package uses the correct server at runtime
What should you do?



Answer:



QUESTION
10
You are designing a Microsoft SQL Server 2005 Integration Services (SSIS) package. The
package is named UpdateTable.dtsx and contains a variable named runlD. The package must
run by using the dtexec utility. The runlD variable must be set at runtime to a value of 5. You need
to meet the outlined requirements. What should you do?

A. Execute dtexec /F “c:\ssisPackages\UpdateTable.dtsx” /SET
\packages.variables[runlD].Value;5.
B. Execute dtexec /F “c:\ssisPackages\UpdateTable.dtsx” /SET \packages.variables.runlD=5.
C. Create a text file that specifies the variable name and value in the format
package.variables[runlD].Value = 5. Execute dtexec /F “c:\ssisPackages\UpdateTable.dtsx”
/COM <filename> where <filename> is the name of the file you just created.
D. Create a text file that specifies the variable name and value in the format runlD=5. Execute
dtexec /F “c:\ssisPackages\UpdateTable.dtsx” /COM <filename> where <filename> is the
name of the text file you just created.

Answer: A

 

 

MCTS Training, MCITP Trainnig

Best Microsoft MCTS Certification, Microsoft MCITP Training at certkingdom.com

Click to rate this post!
[Total: 0 Average: 0]

About the author /


Archives

Latest

+

Random

+
December 2011
M T W T F S S
 1234
567891011
12131415161718
19202122232425
262728293031